Kyosho is releasing new parts for our Mini-Z.
Tires with new compound
The newly developed “2X” compound is based on the conventional compound and aims the characteristics between 20 and 30 degrees. In addition to the super low height front wheels that are popular in the Mini-Z cup, there are two types of radial tires available for the rear: narrow and wide.
*The MZT101-2X, like the other Super Low Height wheels, uses in the Mini-Z Cup, the diameter is free.
The tires will be available in Japan from November 13th.
| Ref. | Part Name | Release Date | Price (with Tax) |
| MZT101-2X | Super Low Height Slick “2X” (4 pieces) *Double-sided tape required | 2025-11-13 | ¥825 |
| MZT102-2X | Mini-Z Racing Radial “2X” (4 pieces) | 2025-11-13 | ¥825 |
| MZT103-2X | Mini-Z Racing Radia Wide “2X” (4 pieces) | 2025-11-13 | ¥825 |
Brass H-Plate Holder for the MR-04 -0.5/0.0/0.75mm
This setting part allows you to change the roll characteristics by using three different types of holders with different contacts points with the rear suspension plate.
Compared to conventional aluminum, brass has a higher specific gravity, which increases the weight at the lower part of the chassis and helps achieve a lower center of gravity. Engraved with 0/0.75/-0.5 to indicate the difference in length. Compatible with the MR-04 and MR-03 chassis.
| Ref. | Part Name | Release Date | Price (with Tax) |
| R246-1321HW | Brass H-Plate Holder for the MR-04 -0.5/0.0/0.75mm | December 2025 | ¥2,640 |
Suspension Balls for Aluminum Steering Block
These machined resin suspension balls are specially designed for use with aluminum steering blocks. They offer smoother movement than standard aluminum suspension balls. They also significantly improve steering performance when cornering. one side is 1mm thicker, and by switching the top and bottom, they can be used as a 0mm type. Pack of 4 (enough for 2 cars).
| Ref. | Part Name | Release Date | Price (with Tax) |
| MZW710-SB | Suspension Balls for Aluminum Steering Block | December 2025 | ¥1,100 |
MA-030EVO2 Chassis Spare Parts
While the new MA-030EVO2 is not yet available, Kyosho is announcing spare parts it new AWD chassis. Three set will be available later this month: the main unit, the upper cover and the receiver cover.
| Ref. | Part Name | Release Date | Price (with Tax) |
| MD404 | Main Unit Set (MA-030EVO2) | November 2025 | ¥9,900 |
| MD405 | Upper Cover Set (MA-030EVO2) | November 2025 | ¥1,990 |
| MD406 | Receiver Cover Set (MA-030EVO2) | November 2025 | ¥1,100 |
New Car Number Stickers
A new set of car number stickers will be shortly available, 8 numbers, 50 sheets per set.
| Ref. | Part Name | Release Date | Price (with Tax) |
| MZW129 | Car Number Stickers | November 2025 | ¥4,950 |
3D printed Low profile Rear Wing for the Audi R8 LMS 2015/2016
On December 8th, a new 3D rear wing for the Audi R8 LMS 2015/2016 will be available. Here are the notes from Kyosho:
This product is produced using a 3D printed, so the following is required:
- To prevent damage during transportation, the product is solid with the support parts that are generated during the production, so you will need to cut them off before use.
- Burrs and bends may occur during production and need to be corrected. Bend can be easily corrected by worming the product in hot water at about 50°C. *Please be careful not to burn yourself when correcting the bends.
| Ref. | Part Name | Release Date | Price (with Tax) |
| MZN-W02L | 3D printed Low profile Rear Wing for the Audi R8 LMS 2015/2016 | December 8th,2025 | ¥1,320 |
